6001-3001b - 6001-3001 - TH Series Time Delay Relay, 200 A

Egis Mobile

6001-3001b - 6001-3001 - TH Series Time Delay Relay, 200 A
6001-3001b - 6001-3001 - TH Series Time Delay Relay, 200 A
6001-3001b - 6001-3001 - TH Series Time Delay Relay, 200 A
6001-3001b - 6001-3001 - TH Series Time Delay Relay, 200 A
Load image into Gallery viewer, 6001-3001b - 6001-3001 - TH Series Time Delay Relay, 200 A
Load image into Gallery viewer, 6001-3001b - 6001-3001 - TH Series Time Delay Relay, 200 A
Load image into Gallery viewer, 6001-3001b - 6001-3001 - TH Series Time Delay Relay, 200 A
Load image into Gallery viewer, 6001-3001b - 6001-3001 - TH Series Time Delay Relay, 200 A

Regular price $204.00

Unit price per 

only 2 left in stock

TOP SIDE DIP SWITCHES

Accessible after installation, for programming time delay and determining active features. Protected by self-retained cover.


STAINLESS STEEL SELF-LOCKING HARDWARE

100% Non-ferrous corrosion resistant materials. All attachment screws and nuts are self-locking.


INTEGRAL I/O CONNECTOR

Rapid and 100% correct assembly via Molex MX-150 connector eliminates poor field connections.


STANDARD AND OPTIONAL HARNESSES

Mating plug with 2 feet of ground and ignition wire included. Optional harnesses with additional outputs / extended wire lengths available


EASY INTEGRATION WITH CT FUSE BLOCKS

Optional EasyLink bus bars provide reduces space and cost to connect TDRs with CT series Fuse Blocks.


EASY INTEGRATION WITH RT FUSE BLOCKS

Optional EasyLink bus bars provide reduces space and cost to connect TDRs with RT series Fuse Blocks.


LED DIAGNOSTICS

Provides indication of pending relay OFF event due to under/over voltage or external off trigger. Output on/off status also provided.

  

MAXIMUM CURRENT -

Continuous:   200 Amps DC @ 73 Deg F

Intermittent:   240 Amps DC (5 Minutes)

OFF STATE CURRENT DRAW

1.5 mA (less than 1 Amp-hr per month of stand-by)

OPERATING SPECIFICATIONS

Voltage:           12 Vdc Nominal (8 - 18 Vdc)

Temperature:  -40 to 85 Deg C

PRODUCT WARRANTY

4 Years from date of sale

TIME DELAY OPTIONS

5 Sec through 16 hours via Dip Switches

ENVIRONMENT PROTECTION STANDARDS 

Waterproof to IP66 . IP6K9K

Ignition Protected to ISO 8846

USER CONFIGURED FEATURES

Input stud voltage sense trigger for relay OFF

Under-voltage and over-voltage load protection

Application Example 

Entire Vehicle Switching and Circuit Protection

Combining a high-amp TH Series Time Delay Relay (TDR) with a 5015 Fuse Block attached to the TDR input stud (left) provides 24 hour / keep-alive circuits; while the second 5015 Fuse Block (right) attaches to the output stud of the TDR providing switched circuits for the installation. The TDR can operate both as a remotely controlled switch and optionally in an autonomous mode after a prescribed time from a trigger event or due to a low input voltage situation. Fuse blocks shown without included covers.

Odoo • Text and Image
                 

Installation Example 

12 Position RT Fuse Block, RT Ground Block, and TH Series Time Delay Relay (TDR)

A well installed power distribution and clean ground return solution. Fused vehicle power is connected to the TDR Time Delay Relay (upper right), then distributed to the 12 Position RT Fuse Block (left). The RT Ground Block (lower right) was separate from the Fuse Block where it was originally tied together, and re-located to a more convenient locations for effective wire harness routing. Also shown, optional cover labels from emergency vehicle label sheet set.

Odoo • Text and Image
Close (esc)

Welcome!

Sign up for Westys newletters for 10% off your next order.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Shopping Cart

Your cart is currently empty.
Shop now